The image at the large end of the Fiber Optic Taper is reduced and coupled to the CCD/CMOS, which can be used as the base element of the scintillator to absorb the ray energy, improve the coupling efficiency, reduce the size of the CCD/CMOS, and protect the CCD/CMOS.

Night vision technology is a special technology to study the generation, enhancement, conversion, transmission, storage and processing of optical image information at night or under low illumination. It is an edge discipline developed in recent decades on the basis of physics, electronics, electronic optics, physiological optics, engineering optics, fiber optics, vacuum technology, semiconductor technology, and computer technology. It is a comprehensive technology integrating optics, mechanics, electronics, and computers. It is one of the three emerging high technologies in the field of optics since the 1960s: laser technology, fiber optics technology and low-light night vision technology.

The Fiber Optic Plate is used as the base plate of the scintillation screen in the digital X-ray detector system. The scintillation screen transmits the visible light converted by X-ray to the detection chip, which has the characteristics of reducing noise, protecting the sensor and improving the contrast.

A sensor array is a group of sensors, usually deployed in a certain geometry pattern.

HONSUN customizes fiber optic plate and fiber optic taper according to customers’ requirements no matter in qualifications or dimensions.

The technique of coupling Fiber optic taper to CCD is the key technique of Developing ICCD image sensor.Compared with traditional lens imaging system,the FOT x CCD system has a higher coupling efficiency and it can greatly minimize the size and weight of camera.When CCD is coupled to Fiber Optic Taper,there exist 2 layers.